CapCut showing no templates in 2026 is usually a regional feed problem or a stale local cache, not a broken app. In April 2026, a Hindi-language troubleshooting video from the channel Technical Amit Arya walked through three fixes: connecting a VPN before launching CapCut, disabling Android's "force app activity" developer setting and clearing cache data, and reinstalling the app so the search tab returns and the template feed loads again. The results in the video are honest: the first step alone didn't fix it, and the fix only landed once a search term was typed. This article separates what the video demonstrated from what CapCut's own documentation actually supports.
Part 2 of a series, after CapCut Template Not Showing: 3 Fixes.
Why CapCut templates stopped showing in 2026
CapCut template not showing in 2026 usually means the template feed is being filtered by region or blocked by an app-level state, not that the app is broken. Templates are served through CapCut's online content system, so the tab can be empty while editing, exporting and manual project work still function normally. The video frames the problem as days of frustration because a template that turns a two-hour edit into a two-minute job is unavailable, and that framing matches how the feed behaves: the app works, the catalogue does not load.
CapCut is ByteDance's video editor, distributed as CapCut for mobile and desktop and documented at CapCut's official site. Template content is a server-side catalogue rather than a bundled asset, which is why a network change, a region change, or a stale local cache can remove the whole tab. Google Play lists the Android package as com.lemon.lvoverseas, published by Bytedance Pte. Ltd.
Two different failures hide behind the phrase "templates not showing", and the video treats them as one problem when the fix only addresses one:
- The template grid is empty but the search icon is visible. The catalogue isn't being returned, which points at region filtering or a cache holding an old response.
- The search option is missing from the app entirely. Nothing on the screen leads to templates, which points at the installed build or its local state rather than the server.
Method 1: Connect a VPN before opening CapCut
Connecting a VPN before launching CapCut is the first method in the video, and it targets the region filter directly. The presenter opens a VPN app, taps connect, returns to the home screen, and only then opens CapCut. The template tab was still empty after this single step, which is the honest result the video shows rather than an instant fix.
The reasoning is mechanical: if the template catalogue is filtered by detected region, routing the connection through an eligible country changes what the server returns. The video does not name the VPN, does not state the exit country, and does not measure whether the feed changed, so treat this as a necessary precondition in the author's sequence rather than a standalone solution. Proton VPN and similar providers publish free tiers that cover this kind of use, but whether a specific provider changes CapCut's feed depends on the exit node and is not verified here.
What to check before moving on
- The VPN shows connected before CapCut is launched, not after.
- CapCut is force-stopped or closed from the recent-apps view first.
- The exit country is one where CapCut template content is normally available.
If the template tab is still empty after a clean relaunch, the video's next step addresses cached state rather than region. Expect this step to take a few minutes at most; the point is the order of operations, not the VPN itself.
Method 2: Disable force app activity and clear cache
The second method toggles Android's force-app-activity developer setting off, then clears CapCut's cache data, and this is the step the video associates with the feed finally returning. On the presenter's phone, Apps is opened from Settings, CapCut is selected, force app activity is switched off, then Clear data is tapped and the top option, clear cache, is confirmed.
Force app activity is an Android developer option that constrains background behaviour for testing. Leaving it enabled restricts how an app retains and restores state, which can stop a content feed from refreshing on launch. Clearing cache then removes the stale catalogue the app was holding, so the next launch has to fetch templates from the server again.
The exact tap sequence in the video
- Open the phone's Settings app.
- Scroll to Apps and tap it, then find CapCut in the list.
- Tap force app activity and switch it off, then confirm with OK.
- Return to CapCut's app info page, tap Clear data and choose the cache option at the top, then confirm with OK.
- Relaunch CapCut. The template tab may still be empty, but the search option should now appear at the top of the screen.
The video shows the template grid still missing immediately after this step on the first relaunch, then returning when a search term is typed. Searching "new template 2026" in the search field surfaced trending 2026 templates, which is the point at which the presenter declares the problem fixed.
One detail worth knowing before you tap: on many Android builds the Clear data menu shows three entries, a small cache line and a larger storage line beneath it. Picking the top entry removes temporary files only. Picking the storage entry erases drafts and settings along with the cache.
Method 3: Reinstall CapCut when search is also missing
Reinstalling CapCut is the video's third method and is reserved for the case where even the search option is absent, not for an empty template grid alone. The presenter states plainly that if search is not visible in your CapCut build, uninstall the app and install it again. A fresh install restores the default navigation, including the search entry point that leads to templates.
This step works because it discards both the cached catalogue and any local settings or flags that survived the cache clear. It also means losing local draft projects unless they are backed up, so it is a last resort rather than a routine fix. The video does not show the reinstall itself, does not name a version number, and does not show the Play Store listing, so nothing here confirms a specific CapCut release as the fixed one.
If you do reinstall, prefer the supported source: Google Play for Android, or CapCut's own download page for desktop. A build from anywhere else is a different question from the template feed problem.
Which fix applies to your CapCut problem
The three methods target different causes, so the right choice depends on what you actually see on screen. An empty grid with search visible points at the region or cache layer; a build with no search entry point at all points at the installation. The table below maps each symptom to the method the video demonstrates for it.
| Symptom in CapCut | Most likely cause | Fix demonstrated |
|---|---|---|
| Template grid empty, search icon visible | Region filter or stale cache | Methods 1 and 2 |
| Template tab present, no content loads | Network or region | Method 1 |
| Search option missing entirely | App build or local state | Method 3 (reinstall) |
| Templates load after typing a search term | Feed refresh restored | Completion of Method 2 |
None of the three steps is a permanent guarantee. A VPN session that ends, a developer option that is re-enabled by a system update, or a cache that refills with filtered content can bring the empty grid back. The video presents the fixes as a complete solution that ends the problem "forever"; what the recording actually shows is a restored search path on one phone, which is narrower than that claim.
If you only have time for one thing, clear the cache first. It's the step with the least downside, and it's the one that visibly changed the screen in the recording.
What the video does not establish
The walkthrough is one person's phone, recorded on 14 April 2026, and it does not report a device model, an Android version, a CapCut version or a region. That matters because each of those variables can change whether region filtering, an Android developer toggle, or cache state is the cause. The video shows the sequence working once on one device, which is first-hand experience rather than reproducible evidence.
The video also ends by pointing viewers to a Telegram channel for a Pro version of CapCut. Installing a modified or Pro build from an unofficial channel carries account and device risk, is not reviewed here, and is not part of the three fixes. If you want a supported build, install from Google Play or CapCut's own download page, and treat third-party builds as a separate decision from the template feed problem.
The presenter in the video is not named on screen, and no canonical profile was located for the channel Technical Amit Arya, so this article attributes the walkthrough to the channel rather than to an individual.
One more gap: the video never says whether the fix survived a restart, a VPN disconnect or a week of normal use. The single measurement it offers is a search result screen showing 2026 trending templates. That's the evidence, and it's thinner than the video's framing suggests.
FAQ
Why is my CapCut template not showing in 2026? The template catalogue is served from CapCut's servers and can be filtered by detected region or blocked by a stale local cache, so the tab empties while the rest of the app still works. A VPN connection and a cache clear are the two fixes most likely to change what the feed returns.
Does clearing CapCut cache delete my projects? Clearing cache data removes temporary files only and leaves your drafts in place. The Clear data menu also offers a larger erase option, so choose the cache entry at the top of the list, not the storage entry below it, if you want to keep local projects.
Is a VPN allowed with CapCut? CapCut does not publish a rule about VPN use in its help centre, and the video treats it as a normal step. Whether template content appears through a given provider depends on the exit country and is not something the video or this article verifies.
When should I reinstall CapCut instead? Reinstall when the search option itself is missing from the app, because that indicates the installed build or its local state rather than a regional catalogue gap. Back up drafts first, since a reinstall clears local project data.
Can I still make videos if templates never load? Yes. Templates are a shortcut, not a requirement. Manual editing, captions and export all work without the template feed, which is why the video's own framing about time saved is about convenience rather than capability.
Turning a tutorial into a written guide
The template problem in this article is a small, specific case of a wider pattern: the knowledge that fixes it lives in a four-minute video that is hard to search, hard to skim and hard to reference later. Someone searching for the same fix next month will not find the timestamp where the presenter taps Clear data.
If you have that kind of knowledge sitting in YouTube videos, you can put it somewhere people can actually read. Take the URL of your video, paste it into Skala Blog, let it transcribe the audio, and generate a structured article from it. The transcription step keeps your own wording and sequence; the article step turns it into headings, steps and a format search engines and readers can both use.
Thanks also to Gustavo dev doido, whose work on moving video knowledge into readable formats is a useful reference point for anyone treating a tutorial as a document rather than a one-off upload.
Fork this article
Start a new branch from the same video, shaped your way. You keep the credit; the original keeps the attribution.
A fork in another language is filed as a translation of this article, so the two pages point at each other. You can unlink it later from the editor.
0/240
You are creating
- Format
- For
- Language
- Source
- Your angle
You will be asked to sign in before it is generated.
Buy credits